آمار

تعداد نشریات21
تعداد شماره‌ها301
تعداد مقالات3,173
تعداد مشاهده مقاله3,211,785
تعداد دریافت فایل اصل مقاله2,380,298
Saberi Noughabi, Ali, Hatefi Torshizi, Nader, Najafi, Hamidreza. (1395). A new interval approach for setting the distance relay zones to achieve perfect selectivity and maximum sensitivity. , 1(2), 89-96. doi: 10.22077/ijpe.2016.514
Ali Saberi Noughabi; Nader Hatefi Torshizi; Hamidreza Najafi. "A new interval approach for setting the distance relay zones to achieve perfect selectivity and maximum sensitivity". , 1, 2, 1395, 89-96. doi: 10.22077/ijpe.2016.514
Saberi Noughabi, Ali, Hatefi Torshizi, Nader, Najafi, Hamidreza. (1395). 'A new interval approach for setting the distance relay zones to achieve perfect selectivity and maximum sensitivity', , 1(2), pp. 89-96. doi: 10.22077/ijpe.2016.514
Saberi Noughabi, Ali, Hatefi Torshizi, Nader, Najafi, Hamidreza. A new interval approach for setting the distance relay zones to achieve perfect selectivity and maximum sensitivity. , 1395; 1(2): 89-96. doi: 10.22077/ijpe.2016.514

A new interval approach for setting the distance relay zones to achieve perfect selectivity and maximum sensitivity

Iranian Journal of Power Engineering
مقاله 6، دوره 1، شماره 2 - شماره پیاپی 2016، دی 2016، صفحه 89-96    اصل مقاله (118.74 K)
نوع مقاله: Original Article
شناسه دیجیتال (DOI): 10.22077/ijpe.2016.514
نویسندگان
Ali Saberi Noughabi* ؛ Nader Hatefi Torshizi؛ Hamidreza Najafi
University of Birjand, Iran
چکیده
In this paper, an interval approach is presented to achieve perfect selectivity and maximum sensitivity in distance relay zones, considering uncertainties. For this purpose, first, the uncertainties affecting the settings of the three zones of a distance relay are discussed. Then, by using the Monte-Carlo simulation, the uncertainties are modelled and the impedances seen by the distance relay are obtained for internal and external faults of the protection zones. Under such conditions, the impedance seen by the relay is modelled as interval impedance for each zone of the relay. With interval impedance being known, an upper and a lower bound are obtained for each zone of the relay. Then, the settings of each zone are determined in such a way that at first, perfect selectivity is achieved between different zones of distance relays and second, the sensitivity of each zone is maximized. The sensitivity and the selectivity of the distance relay zones are defined based on the protection philosophy of these zones. The proposed interval method is applied on a sample 8-bus system, and the advantages of the proposed approach in comparison with conventional methods of setting distance relay zones are shown.
کلیدواژه‌ها
Interval Impedance؛ Sensitivity؛ Coordination؛ Distance Relay؛ Monte-Carlo Simulation
آمار
تعداد مشاهده مقاله: 1,453
تعداد دریافت فایل اصل مقاله: 408


نماد الکترونیک 

 

سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب