آمار

تعداد نشریات21
تعداد شماره‌ها345
تعداد مقالات3,638
تعداد مشاهده مقاله4,706,579
تعداد دریافت فایل اصل مقاله3,142,619
Issa, Mustafa, Mohammed, Aban, Hamad, Reda, Mohammed Ameen, Ali, Salman, Umulbaneen, Lafta, Fatima Ulzahra. (1404). Predictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics. , (), -. doi: 10.22077/jgm.2025.9953.1059
Mustafa Adil Issa; Aban Othman Mohammed; Reda Jassim Hamad; Ali Yahya Mohammed Ameen; Umulbaneen Hasan Salman; Fatima Ulzahra Hayder Lafta. "Predictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics". , , , 1404, -. doi: 10.22077/jgm.2025.9953.1059
Issa, Mustafa, Mohammed, Aban, Hamad, Reda, Mohammed Ameen, Ali, Salman, Umulbaneen, Lafta, Fatima Ulzahra. (1404). 'Predictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics', , (), pp. -. doi: 10.22077/jgm.2025.9953.1059
Issa, Mustafa, Mohammed, Aban, Hamad, Reda, Mohammed Ameen, Ali, Salman, Umulbaneen, Lafta, Fatima Ulzahra. Predictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics. , 1404; (): -. doi: 10.22077/jgm.2025.9953.1059

Predictive Study to Identify the Sanding Initiation Threshold Depending on Physical and Mechanical Rock Characteristics

Journal of Geomine
مقالات آماده انتشار، پذیرفته شده، انتشار آنلاین از تاریخ 17 آذر 1404
نوع مقاله: Original Article
شناسه دیجیتال (DOI): 10.22077/jgm.2025.9953.1059
نویسندگان
Mustafa Adil Issa* 1؛ Aban Othman Mohammed1؛ Reda Jassim Hamad2؛ Ali Yahya Mohammed Ameen1؛ Umulbaneen Hasan Salman1؛ Fatima Ulzahra Hayder Lafta1
1Petroleum Engineer
2Petroleum engineer
چکیده
Sand production is an undesirable phenomenon that occurs in wellbores that extract resources from sandstone formations. It presents a significant challenge to the advancement of oil and gas operations. The main implications of sand production include the disintegration of geological formations, the deterioration of both surface and downhole systems, reduced hydrocarbon extraction efficiency, and various environmental concerns. These challenges could result in annual costs amounting to billions of dollars for the petroleum industry. Thus, this study was motivated, and a field case study in southern Iraq was conducted to introduce the predictive techniques that depend on the geomechanical and physical properties to foresee and mitigate the possibility of sand production hazards. Moreover, seven threshold criteria were utilized to identify the critical limit at the onset of sanding. These criteria include unconfined compressive strength (UCS), total porosity (PHIT), shear modulus and rock compressibility ratio, sonic compression wave, B-index, S-index, and Ec-index. Additionally, some of these techniques are strongly related to elastic and strength rock parameters; hence, to perform them accurately, more appropriate correlations were used for the area of interest. The results indicate that sand production is likely to occur when the threshold values for the UCS, B-index, and S-index techniques fall below 4,200 psi, 1.6 × 106 psi, and 9.2 × 109 psi, respectively, while the value of PHIT exceeds 20%. Finally, this investigation could be utilized as a guide for optimizing sand managing to achieve maximum completion performance.
کلیدواژه‌ها
Sand Production؛ Mechanical and Physical Rock Properties؛ Geomechanical parameters؛ Well logging؛ Sanding risk
آمار
تعداد مشاهده مقاله: 1


نماد الکترونیک 

 

سامانه مدیریت نشریات علمی. قدرت گرفته از سیناوب