Investigating the Performance of Metal Surfaces Modified by Laser on the Efficiency of Water Harvesting from Humid Air

Al-Agha, M. R., & Mortaja, R. S. (2005). Desalination in the Gaza Strip: drinking water supply and environmental impact.  Desalination, 173(2), 157-171.

Bhushan, B. (2020). Design of water harvesting towers and projections for water collection from fog and condensation. Philosophical Transactions of the Royal Society A, 378 (2167), 20190440.

Brown, P. S., & Bhushan, B. (2016). Bioinspired materials for water supply and management: water collection, water purification and separation of water from oil. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 374(2073), 20160135.

Clark, L. (1985). Groundwater abstraction from basement complex areas of Africa. Quarterly Journal of Engineering Geology and Hydrogeology, 18(1), 25-34.

Dennis, A. S. (1980). Weather modification by cloud seeding. International geophysics series, 24.

Furumai, H. (2008). Rainwater and reclaimed wastewater for sustainable urban water use. Physics and Chemistry of the Earth, Parts A/B/C, 33(5), 340-346.

Ganesh, V. A., Ranganath, A. S., Baji, A., Raut, H. K., Sahay, R., & Ramakrishna, S. (2017). Hierarchical structured electrospun nanofibers for improved fog harvesting applications. Macromolecular Materials and Engineering, 302(2), 1600387.

Ghosh, R., Patra, C., Singh, P., Ganguly, R., Sahu, R. P., Zhitomirsky, I., & Puri, I. K. (2020). Influence of metal mesh wettability on fog harvesting in industrial cooling towers. Applied Thermal Engineering, 181, 115963.

Ghosh, R., Sahu, R. P., Ganguly, R., Zhitomirsky, I., & Puri, I. K. (2020). Photocatalytic activity of electrophoretically deposited TiO2 and ZnO nanoparticles on fog harvesting meshes. Ceramics International, 46(3), 3777-3785.

Gurera, D., & Bhushan, B. (2019). Optimization of bioinspired conical surfaces for water collection from fog. Journal of colloid and interface science, 551, 26-38.

Gürsoy, M., & Kocadayıoğulları, B. (2023). Environmentally Friendly Approach for the Plasma Surface Modification of Fabrics for Improved Fog Harvesting Performance. Fibers and Polymers, 24(10), 3557-3567.

Hillie, T., & Hlophe, M. (2007). Nanotechnology and the challenge of clean water. Nature nanotechnology, 2(11), 663-664.

Jagdheesh, R. (2022). Rapid and Tunable Superhydrophobic Tin Surface by Ultrafast Laser Processing. Available at SSRN 4155215.

Jarimi, H., Powell, R., & Riffat, S. (2020). Review of sustainable methods for atmospheric water harvesting. International Journal of Low-Carbon Technologies, 15(2), 253-276.

Knapczyk-Korczak, J., Szewczyk, P. K., Ura, D. P., Bailey, R. J., Bilotti, E., & Stachewicz, U. (2020). Improving water harvesting efficiency of fog collectors with electrospun random and aligned Polyvinylidene fluoride (PVDF) fibers. Sustainable materials and technologies, 25, e00191.

Munoz-Reinoso, J. C. (2001). Vegetation changes and groundwater abstraction in SW Doñana, Spain. Journal of Hydrology, 242(3-4), 197-209.

Nguyen, L. T., Bai, Z., Zhu, J., Gao, C., Liu, X., Wagaye, B. T., ... & Guo, J. (2021). Three-dimensional multilayer vertical filament meshes for enhancing efficiency in fog water harvesting. ACS omega, 6(5), 3910-3920.

Nioras, D., Ellinas, K., Constantoudis, V., & Gogolides, E. (2021). How different are fog collection and dew water harvesting on surfaces with different wetting behaviors?. ACS Applied Materials & Interfaces, 13(40), 48322-48332.

Olivier, J. (2002). Fog-water harvesting along the West Coast of South Africa: A feasibility study. Water Sa, 28(4), 349-360.

Randhir, T., & Genge, C. (2005). Watershed based, institutional approach to developing clean water resources 1. JAWRA Journal of the American Water Resources Association, 41(2), 413-424.

Razi, S., Madanipour, K., & Mollabashi, M. (2016). Laser surface texturing of 316L stainless steel in air and water: A method for increasing hydrophilicity via direct creation of microstructures. Optics & Laser Technology, 80, 237-246.

Rosenfeld, D., & Woodley, W. L. (1993). Effects of cloud seeding in west Texas: Additional results and new insights. Journal of Applied Meteorology and Climatology, 32(12), 1848-1866.

Schunk, C., Trautwein, P., Hruschka, H., Frost, E., Dodson, L., Derhem, A., ... & Menzel, A. (2018). Testing water yield, efficiency of different meshes and water quality with a novel fog collector for high wind speeds. Aerosol and Air Quality Research, 18(1), 240-253.

Seo, D., Lee, J., Lee, C., & Nam, Y. (2016). The effects of surface wettability on the fog and dew moisture harvesting performance on tubular surfaces. Scientific reports, 6(1), 1-11.

Şevik, S., & Aktaş, A. (2022). Performance enhancing and improvement studies in a 600 kW solar photovoltaic (PV) power plant; manual and natural cleaning, rainwater harvesting and the snow load removal on the PV arrays. Renewable Energy, 181, 490-503.

Shi, W., Anderson, M. J., Tulkoff, J. B., Kennedy, B. S., & Boreyko, J. B. (2018). Fog harvesting with harps. ACS applied materials & interfaces, 10(14), 11979-11986.

Showket, J., Majumder, S., Kumar, N., Sett, S., & Mahapatra, P. S. (2024). Fog harvesting on micro-structured metal meshes: Effect of surface ageing. Micro and Nano Engineering, 22, 100236.

UNID. (2016). Water for Life, 2005-2015. Focus Areas: Water scarcity (November 2014), http://www.un.org/waterforlifedecade/scarcity.shtml

Vieira, A. S., Weeber, M., & Ghisi, E. (2013). Self-cleaning filtration: A novel concept for rainwater harvesting systems. Resources, Conservation and Recycling, 78, 67-73.

Wada, Y., Van Beek, L. P., Van Kempen, C. M., Reckman, J. W., Vasak, S., & Bierkens, M. F. (2010). Global depletion of groundwater resources. Geophysical research letters, 37(20).

Wang, X., Guo, Z., & Liu, W. (2023). An efficient fog collector achieved by optimal hierarchical surface patterns and wetting gradient. Advanced Materials Interfaces, 10(8), 2202123.

Wang, X., Zeng, J., Li, J., Yu, X., Wang, Z., & Zhang, Y. (2021). Beetle and cactus-inspired surface endows continuous and directional droplet jumping for efficient water harvesting. Journal of Materials Chemistry A, 9(3), 1507-1516.

Wang, X., Zeng, J., Yu, X., Liang, C., & Zhang, Y. (2019). Water harvesting method via a hybrid superwettable coating with superhydrophobic and superhydrophilic nanoparticles. Applied Surface Science, 465, 986-994.

World Health Organization. (2011). Safe drinking-water from desalination (No. WHO/HSE/WSH/11.03). World Health Organization.

Worm, J. (2006). AD43E Rainwater harvesting for domestic use (No. 43). Agromisa Foundation.

Yang, Z., Tian, Y., Zhao, Y., & Yang, C. (2019). Study on the fabrication of super-hydrophobic surface on inconel alloy via nanosecond laser ablation. Materials, 12(2), 278.

Zeng, M. J., Qu, Z. G., & Zhang, J. F. (2023). Experimental study on water collection performance of wire-to-plate electrostatic fog collector at various fog generation rates and fog flow velocities. Separation and Purification Technology, 305, 122465.

Zhou, W. L., Wu, T., Du, Y., Zhang, X. H., Chen, X. C., Li, J. B., ... & Qu, J. P. (2023). Efficient fabrication of desert beetle-inspired micro/nano-structures on polypropylene/graphene surface with hybrid wettability, chemical tolerance, and passive anti-icing for quantitative fog harvesting. Chemical Engineering Journal, 453, 139784.

Zhu, S., Li, J., Ma, L., He, C., Liu, E., He, F., ... & Zhao, N. (2018). Artificial neural network enabled capacitance prediction for carbon-based supercapacitors. Materials Letters, 233, 294-297